Connecting To An Iphone, Ipad, Or Ipod Touch Using Wi-Fi Direct - Epson WF-110 Series Manual

User's Guide
Network Settings

Connecting to an iPhone, iPad, or iPod touch using Wi-Fi Direct

This method allows you to connect the printer directly to an iPhone, iPad, or iPod touch without a wireless router.
The following conditions are required to connect using this method. If your environment does not match these
conditions, you can connect by selecting Other OS Devices. See "Related Information" below for details on
connecting.
❏ iOS 11 or later
❏ Using the standard camera application to scan the QR code
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Select Wi-Fi Setup on the home screen.
u d l r
To select an item, use the buttons, and then press the OK button.
2. Select Wi-Fi Direct.
3. Check the message, and then press the OK button to proceed.
4. Check the message, and then press the OK button to proceed.
5. Select iOS.
31