Wi-Fi Setup - Epson WF-110 Series Manual

User's Guide
Menu
Epson Connect Services
Google Cloud Print
Services
WF-110 Basic Driver
Restore Default Settings

Wi-Fi Setup

Menu Settings and Explanations
Stop Wi-Fi Signal When the Wi-Fi signal has been stopped, Send Wi-Fi Signal is displayed.
Wi-Fi Wi-Fi Setup Wizard
(Recommended)
Push Button Setup
(WPS)
Others
Wi-Fi Direct iOS
Android
Other OS Devices
Modify
Printer Basics
Settings and Explanations
You can suspend or resume the Epson Connect or Google Could Print service, or cancel using the
services (restore the default settings).
See the Epson Connect portal website for more details.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
Installs the Epson Basic Driver that is embedded in the printer to the computer.
Resets the selected settings to their defaults.
You can search for a Wi-Fi network. Alternatively, you can setup a Wi-Fi network
by entering the information necessary to connect to a wireless router from the
printer's control panel. To setup using this method, you need the SSID and
password for a wireless router.
You can automatically set up a Wi-Fi network by pressing a button on the
wireless router. You can use this method when the wireless router is compatible
with WPS (Wi-Fi Protected Setup) or if the current Wi-Fi connection was
established by pressing a button on the wireless router.
PIN Code (WPS)
Wi-Fi Auto
Connect
Disable Wi-Fi
This method allows you to connect the printer directly to an iPhone, iPad or
iPod touch without a wireless router.
This method allows you to connect the printer directly to your Android device
without a wireless router.
Use this method if you cannot connect using iOS, if the printer is not displayed
on some Android devices, or when you connect from your computer.
Allows you to change the network name and password, frequency range,
disable Wi-Fi Direct, and restore default settings.
(Europe only)
You can automatically connect to a wireless router by
using a PIN code. You can use this method to set up if a
wireless router is capable of WPS (Wi-Fi Protected
Setup).
Use the network settings on the computer to
communicate with the printer wirelessly to set up the
network. This setup method requires that the personal
computer and the wireless LAN router (access point) are
connected by wireless LAN.
You may be able to resolve network problems by
disabling the Wi-Fi settings or making the Wi-Fi settings
again.
25