HermanMiller Ergon 3 Manual

HermanMiller
Ergon 3 Chair
®
Seating that
performs for you.
Seat Height: Paddle-shaped lever on right side
At the proper height, your feet should rest flat on the floor.
Tilt Tension: Knob under seat on front of chair
Depending on the desired tilt resistance, a number of turns may be required.
Set the tilt tension to control the resistance you feel when reclining.
HermanMiller Ergon 3 Chair
®
To raise:
Take your weight off chair, lift lever up.
To lower:
Life lever up while seated.
To increase:
Turn knob to the left.
To decrease:
Turn knob to the right.
Tilt Lock: Lever on right side
For chairs with knee tilt only.
Engage the tilt lock when you want to sit in an upright or partially
reclined position.
Forward Tilt: Small lever on right front
For chairs with knee
tilt/forward angle.
Engage forward tilt to support the thighs' declined posture when performing
intensive tasks such as keyboarding.
1
To lock in upright position:
While seated upright, push lever in.
To release:
Pull lever out.
To position chair forward:
Recline slightly and pull right lever
up. Lean forward to desired angle.
To resume upright position:
Recline slightly and push right
lever down.
Adjustment Guide