Table of Contents
Advertisement
BIOS Setup Utility
3-8.5 Onboard Parallel Ports
Onboard Parallel
Setting
Ports
Parallel Port Mode
ECP/EPP
SPP
ECP
EPP/SPP
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
EPP 1.9 Select EPP port type 1.9
EPP 1.7 Select EPP port type 1.7
PWRON After
On
PWR-Fail
Off
Former-
sts
All manuals and user guides at all-guides.com
Description
The mode depends on your
external device that
connects to this port.
3
Choose DMA3
1
Choose DMA1
The system will switch on
when power comes back
after a power failure.
The system will remain off
when power comes back
after a power failure.
The system will return to
the state it was in before
the power failure when
power returns. (i.e: If the
system was on, it will
switch on again, if it was
off, it will remain off)
60
SY-6IBM
Note
Default
Default
Default
Default
Advertisement
Table of Contents
