SOYO SY-6IBM User's Manual & Technical Reference page 62

BIOS Setup Utility
3-8.3 FDC Controls
FDC Controls Setting
Onboard FDC Disabled
controller
Enabled
3-8.4 Onboard Serial Ports
Onboard Serial Setting
Ports
Onboard UART 1 Disabled
Onboard UART 2
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
UART Mode Select
Normal
IrDA
ASKIR
If [UART Mode Select] is set to [IrDA]/[ASKIR]
RxD, TxD Active Hi, Hi, Lo, Lo,
Lo, Hi, Hi, Lo
IR Transmission
Enabled
Delay
Disabled
All manuals and user guides at all-guides.com
Description
Turn off the on-board
floppy controller
Use the on-board
floppy controller
Description
Choose serial port 1 &
2's I/O address.
Do not set port 1 & 2 to
the same address
except for Disabled or
Auto.
The second serial port
offers these InfraRed
interface modes.
This item allows you to
determine the active of
RxD, TxD.
Check with your IR-device
provider for exact setting.
59
SY-6IBM
Note
Default
Note
Default
(port 1)
Default
(port 2)
Default
Default