Table of Contents
Advertisement
Hardware Setup
Step 14. External Suspend Button (JP10)
Some cases come with a suspend button, insert the plug into JP10.
In addition to through this button, the system can also enter the
suspend mode through your OS.
Note: Suspend mode only functions if your Power Management
mode is APM. Make sure that the BIOS setting for Power
Management is APM. Windows 98 can be installed with ACPI Power
Management (default is APM), in this case suspend mode will not
function either.
Step 15. Power On
You have now completed the hardware installation of your
Motherboard successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the
system is performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot
up sequence is completed. Then push the RESET button and
press <DEL> key again at the beginning of boot-up, during
diagnostic checks.
All manuals and user guides at all-guides.com
27
SY-6IBM
Advertisement
Table of Contents
