Table of Contents
Advertisement
Hardware Setup
Step 9. ATX Power Supply
Plug the connector from the power directly into the 20-pin male ATX
PW connector on the Motherboard, as shown in the following figure.
W83781D
Warning: Follow these precautions to preserve your
Motherboard from any remnant currents when connecting
to ATX power supply:
Turn off the power supply and unplug the power cord
of the ATX power supply before connecting to ATX PW
connector.
The Motherboard requires a power supply with at least 200 Watts
and a "power good" signal. Make sure the ATX power supply can
take at least 720 mA* load on the 5V Standby lead (5VSB) to meet
the standard ATX specification.
All manuals and user guides at all-guides.com
ATX Power
23
SY-6IBM
Advertisement
Table of Contents
