Table of Contents
Advertisement
BIOS Setup Utility
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setting Description
Setup
Interrupt
How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Line
PnP / PCI configuration Integrated Peripherals
IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled
IRQ 14 IRQ 14: PCI / ISA PnP On-Chip Primary PCI IDE:
IRQ 12 IRQ 12: PCI / ISA PnP
IRQ 7
IRQ 7:
PCI / ISA PnP Onboard parallel port: disabled
IRQ 4
IRQ 4:
PCI / ISA PnP Onboard Serial port 1: disabled
IRQ 3
IRQ 3:
PCI / ISA PnP Onboard Serial port 2: disabled
4. Your OS may reassign another interrupt to a PCI slot after BIOS passes
control to the OS, especially if you use Windows 95, 98 or NT.
Slot 1/2/3/4
Auto
Use IRQ NO.
Used MEM
Memory
base addr
length
Assign IRQ
Enabled BIOS will assign IRQ for
For USB
Disabled BIOS won' t assign IRQ
PnP OS
Yes
Installed
No
3-6.4 PNP/PCI Configuration Controls
PNP/PCI
Setting Description
Controls
All manuals and user guides at all-guides.com
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse
Port is not used.
8K,16K,32K,64K.
(Please ask your card
provider for the exactly
memory length of this
add-on card.)
USB port.
for USB port.
Set this field to [Yes] if
you are running
Windows 95, which is
PnP compatible.
If the OS you are
running does not
support PnP
configuration.
55
SY-6IBM
Note
disabled
Default
This item
appears only
when the
[Based MEM
base addr] set
to I/O address.
Default
Default
(If there is any
doubt, set this
field to [No])
Note
Advertisement
Table of Contents
