Table of Contents
Advertisement
Hardware Setup
Step 8. Cooling Fan Installation
1. CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the
3-pin fan cable to the CPUFAN connector on the Motherboard. The
fan will stop when the system enters into Suspend Mode. (Suspend
mode can be enabled from the BIOS Setup Utility, [POWER
MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
CPUFAN Pin Assignment
GND
2. Chassis Cooling Fan
Some chassis also feature a cooling fan. This Motherboard features
a CHAFAN connector to provide 12V power to the chassis fan.
Connect the cable from the chassis fan to the CHAFAN 3-pin
connector. Install according to the following pin assignment:
Chassis Cooling Fan
CHAFAN Pin Assignment
Note: CPUFAN must be installed for this Motherboard,
CHAFAN is optional.
All manuals and user guides at all-guides.com
CPU Cooling Fan
12V
SENSOR
1
2
3
SENSOR
3
12V
2
GND
1
22
SY-6IBM
Advertisement
Table of Contents
