Mocka Eclipse Assembly Instructions Manual page 10

Eclipse Two Door Cabinet
Assembly Instructions
HOW TO ADJUST THE HINGES TO
ALIGN THE DOORS IF NEEDED.
STEP 1
Open the door.
Panel
Door
STEP 2
Adjuse the door panelsupward or downward
1.
2.
MOVE DOOR UPWARD
OR DOWNWARD
Unscrew 2 screws in round
holes loosen 2 screws in oval
holes a bit.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3.
Tighten 2 screws in oval
holes. Screw in 2 screws in
round holes
STEP 3
Adjuse the flush between door panel and side panel
1.
2.
KEEP DOOR IN RIGHT
MOVE DOOR OUTWARD
by turning this screw
counter-clockwise
STEP 4
Adjuse the Gap beteen door
panel and side panel
1.
2.
MOVE DOOR BACK OR
Loosen this screw a bit.
3.
MOVE DOOR OUTWARD
POSITION
by turning this screw clockwise
3.
Re-tighten this screw.
FORTH
10