Page 1
The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 2
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 2x Insert 4x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. panels [8] to panel [1] and secure with 8x screws (E). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 3
Insert 4x bolts (C) into panel [5]. Tighten with a screwdriver. Attach 2x panels [6] to panel [5] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 4
Attach panel [3] to panel [6] with 2x dowels (A) and secure with 2x locking nuts (D). Attach panel [4] to panel [6] with 2x dowels (A) and secure with 2x Tighten with a screwdriver. locking nuts (D). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 5
Slide 2x panels [7] down along the grooves between panels [3], [4] and with 6x locking nuts (D). Tighten with a screwdriver. [5] to form the back of the unit as shown. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 6
Attach panel [2] to the unit with 6x dowels (A) and secure with 6x screws (B). [5] to form the back of the unit as shown. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 7
Eclipse Buffet Attach panel [11] to panels [9] and [10] and secure with 2x bolts (L). Attach panel [10] to panel [9]. Tighten with an Allen Key (P). mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 8
Tighten with an Allen Key (P). Attach 2x height adjuster (I) panels [10] to panel [2] and secure with 2x screws (H). to panels [9] as shown. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 9
(M) to panel [14] and secure with 2x screw (N). 2x screws (F). Tighten with a screwdriver. Attach 4x buffer plates (O) Tighten with a screwdriver. to panels [6] as shown. Ensure the doors open and close easily. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 10
2x washers (Z), 2x wall anchors (X) and 2x wall screws (Y). Ensure unit using 2x washers (Z) and 2x screws (W). Tighten with a screwdriver. is balanced and steady before use. You’re done, enjoy! mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 11
Buffet After installation, if the two handles are not aligned, loosen the screws in the back, adjust the two handles to align them, and then tighten the screws back up. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Need help?
Do you have a question about the Eclipse Buffet and is the answer not in the manual?
Questions and answers