Table of Contents
Advertisement
Bypass Mode: Enable or disable the bypass mode. When select "ON", the output
format will be the same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select "Reset", the input property will be recover to factory setting.
Take
The take interface is shown as the figure below:
Set the transition time, and the adjustment range is 0~10S.
Slide the black out switch to enable or disable the black function. Auto take on is the
default state. If select black out and auto take on, the preview image will black or
seamless switch to LED display instantaneously.
Click "Cut" or "Take", the preview will be cut or seamless switch to LED display.
EDID
Click the EDID shortcut "
", and pop-up window with input ports that support
EDID as follows:
The special display project or LED display application would like to require special
resolution settings to meet the requirement. Select the suitable input port to
customize the EDID. As shown in the figure below:
37/30
Advertisement
Table of Contents
