Table of Contents
Advertisement
Press button ALL
in IN area, all outputs display the one selected input. For example, after pressing
button ALL and press button 6 in IN area, all the displays shows the image of input 6.
The LCD on device shows the info below:
Press button ALL again, all lights go out except button 1 in OUT.
SAVE
If the IN→OUT (matrix) setting need to be saved, press button SAVE
show instruction as below
At this time, press any button among 1-32 in IN area, it means save to the
corresponding position of 1-32, i.e., press button 2 means save to SAVE 2.
Press any button among 1-33 in OUT area, it means save to corresponding position of
33-64, i.e., press button 1 means save to SAVE33, button 7 means SAVE39.
LOAD
If the saved setting need to be recalled,press button LOAD
below
The button indicating saved position illuminates and the latest saved position flashes.
For example, in previous operation, there are 3 saved position, SAVE2, SAVE33,
SAVE39, SAVE39 is the latest one, button 2 in IN area, button 1 in OUT area
illuminate and button 7 in OUT area flashes.
Press the above illuminating or flashing button to Load the corresponding SAVE.
POWER-STAND BY MODE
Press button POWER
and all buttons in OUT area light up, then press any button
O:123456789ABCDEFG
I : 666666666666666666
I :
SAVE TO:_
LOAD FROM：_
LCD shows the indication as follow:
ENTER STANDBY MODE
YES<ENTER>,NO<MENU
, LCD will
，LCD will show as
12/30
Advertisement
Table of Contents
