TSC PRINTRONIX AUTO ID TC200 Series User Manual page 44

Item
Density
Set the printing darkness. Available setting range: 0 to 30.
Print Speed Set the print speed.
Tear Off Adjust media stop location. Available setting value range: -120~120 dots.
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Print mode
Peeler Off: Enable the label peel off mode.
Cutter: Enable the label cutter mode
Print Width Set the print width. Available setting range: 2 ~ 999 dots.
List Fonts Print the current fonts list from the memory devices to the label.
List Images Print current printer available images list stored at the memory device to the label.
List Formats Print current printer available formats list from the memory devices to the label.
List Setup Print current printer configuration to the label.
Control Prefix
Set control prefix character.
Format Prefix Set format prefix character.
Delimiter Char
Set delimiter character.
Description Default
16
6 (203dpi)
4 (300dpi)
3 (600dpi)
0 dot
Tear Off
812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
39