Introductions, Features And Applications; Introductions; Features; Applications - Leadshine Technology DM542E User Manual

1. Introductions, Features and Applications

Introductions

The DM542E is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest
motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls
mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to
optimal modes with different motors. Compared with traditional analog drives, DM542E can drive a stepper motor at
much lower noise, lower heating, and smoother movement. Its unique features make DM542E an ideal choice for high
requirement applications.

Features

 Anti-Resonance provides optimal torque and nulls mid-range instability
 Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different
motors
 Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother
motor movement
 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000,
8000, 10000, 20000, 25000
 Soft-start with no "jump" when powered on
 Input voltage 20-50VDC
 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
 Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
 Automatic idle-current reduction
 Suitable for 2-phase and 4-phase motors
 Support PUL/DIR mode
 Over-voltage, over-current, protections

Applications

Suitable for a wide range of stepper motors, size from NEMA17 to 24. It can be used in various kinds of machines,
such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly
adapt to the applications with low noise, low heating, high speed and high precision.

2. Specifications

Electrical Specifications (T
Parameters
Output Peak Current
Input Voltage
Logic Signal Current
Pulse input frequency
Pulse Width
Isolation resistance
= 25℃/77℉)
j
Min
1.0
+20
7
0
2.5
500
DM542E Full Digital Stepper Drive Manual V2.0
DM542E
Typical
- 4.2 (3.0 RMS)
+36
10
-
-
1
Max Unit
A
+50 VDC
16 mA
200 kHz
- uS
MΩ