Table of Contents
Advertisement
1. Introduction
The 3DM580S is Leadshine newest digital stepper drive based on an advanced control algorithm. It brings a unique level of
system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup
technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise,
lower heating, smoother movement than most of the drives in the markets. Its unique features make the 3DM580S an ideal
solution for applications that require low-speed smoothness.
1.1 Features
Step & direction (PUL/DIR) or CW/CCW (double pulse) control
Suggested supply voltage 20-50 VDC, up to 74VDC
500KHz max pulse input frequency in dutycycle 50%
8 microstep resolutions of 200-10,000 via DIP switches, or 200-51,200 via software (increase by 100)
16 output current settings of 2.1 -8.0A via DIP Switches, or 0.5-8.0A via software (increase by 0.1)
Configurable control command smoothing for reducing motor vibration
Idle current reduction to 50% or 90% selection via SW5
Convenient self-test for easy diagnosis
Two motion modes of low-speed smooth and high-speed large torque
Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
Soft-start with no "jump" when powered on
Fault output
Over-voltage, over-current protections
CE certified and RoHS compliant
1.2 Applications
Suitable for a wide range of Stepper motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such
as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM580S
an ideal solution for applications that require both low-speed smoothness and high speed performances.
2. Specifications
2.1 Electrical Specifications
Parameters
Output Current
Supply Voltage
Logic signal current
Pulse input frequency
Minimal pulse width
Minimal direction setup
Isolation resistance
Email: tech@leadshine.com
Min
Typical
0.5
-
20
24 - 48
7
10
0
-
1
-
5
-
500
-
1
3DM580S 3-Phase Digital Stepper Drive User Manual
Max
8.0 (5.7 RMS)
74
16
500
-
-
-
Unit
A
VDC
mA
kHz
μs
μs
MΩ
TEL: (86)755-26409254
Advertisement
Table of Contents
