4_Installation; 4_1 Positioning The Terminal - Ingenico L5KCLWBTV3 User Manual

4_Installation

4_1 Positioning the terminal

Install the terminal on a flat surface, with an easy access to an electrical
outlet. Place the terminal away from any heat source and protected
from dust, vibrations and electromagnetic radiations (away from video
terminals, PC, anti-shoplifting barriers ...). The terminal is exclusively
made for indoor use.
The Lane/5000 device may be mounted on a flat surface, wall, or
customer stand.
CAUTION
Do not place the Lane/5000 device on a PC monitor, adjacent
to an electronically active security tag deactivation system,
or near other sources of magnetic fields.
The Lane/5000 device must be at least 30 centimeters (12 inches)
away from an electronically active type of security tag deactivation
pad.
An electronically active system sends out a powerful and
potentially disruptive signal to deactivate the security tag. If
the Lane/5000 device is placed too close to the system's pad, or
placed above the pad, the product may not work properly.
A passive system is a permanent magnet type that does not send
out a signal. This type should not affect the Lane/5000 device.
Operating conditions
Ambient temperature
Max relative humidity
Max altitude
Storage conditions
Storage temperature
Max relative humidity
Lane/5000
900021971 R11 000 06/0818
from 0°C to +45°C
85% RH non-condensing at +40°C
2000 m
-20°C, +55°C
85% at +55°C
Copyright© 2018 Ingenico
12
All rights reserved