Specifications - Sony STR-DA5600ES Operating Instructions Manual

Clearing the memory
Reference sections
To clear
All memorized settings
Multifunction remote
commander
To clear the memory of the
simple remote commander
After removing the batteries, do not use the
remote for a few minutes.
About support information
Refer to the following web site for details of
the latest information on the receiver.
For customers in the United States and
Canada:
http://www.sony.com/essupport
For the customers in Europe:
http://support.sony-europe.com/quickjump/
STR

Specifications

AUDIO POWER
SPECIFICATIONS
See
page 43
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
page 160
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 130
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
Reference Power Output at Stereo Mode
Reference Power Output
Reference Power Output
3)
watts per channel
1) 2)
(8 ohms 20 Hz – 20 kHz,
THD 0.09%):
3)
130 W + 130 W
4)
120 W + 120 W
(4 ohms 20 Hz – 20 kHz,
THD 0.15%):
3)
130 W + 130 W
4)
120 W + 120 W
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT :
3)
140 W + 140 W
4)
130 W + 130 W
2) 3)
CENTER : 140 W
4)
130 W
2)
SURROUND :
3)
140 W + 140 W
4)
130 W + 130 W
2)
SURROUND BACK :
3)
140 W + 140 W
4)
130 W + 130 W
(4 ohms 1 kHz, THD 0.7%)
2)
FRONT :
3)
130 W + 130 W
4)
120 W + 120 W
2) 3)
CENTER : 130 W
4)
120 W
continued
169 GB