Speaker Settings; Speaker Pattern - Sony STR-DA5600ES Operating Instructions Manual

x L
Sets the data of the left channel to the
reference value.
x R
Sets the data of the right channel to the
reference value.
Notes
• This function works only when you select "Front
Reference" for the auto calibration type
(page 115).
• Perform auto calibration after you set "Front Ref
Type."
118
GB

Speaker settings

You can adjust each speaker manually. You
can also adjust the speaker levels after auto
calibration is completed.
Note
The Speaker settings are only for the current
"Seating Position."
Impedance
You can set the speaker impedance. For
details, see "9: Setting the speakers"
(page 44).
x 4 Ω
x 8 Ω

Speaker Pattern

Selects "Speaker Pattern" according to the
speaker system which you are using. Select the
speaker pattern before you perform auto
calibration.
Center Mix
You can set the analog downmix settings on or
off.
x OFF
If the speaker pattern is set so that there is a
center speaker, this setting is set to "OFF"
automatically.
x ON
We recommend you set "Center Mix" to "ON"
to enjoy digital audio with high quality sound
when you do not have a center speaker
connected. Analog downmix works when you
set "Center Mix" to "ON." This setting is also
effective to input signals from the MULTI
CHANNEL INPUT jacks.