Specifications - Sony STR-DG820 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DG820:
Table of Contents

Advertisement

Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC
DISTORTION:
With 8 ohm loads, both channels driven, from
20 Hz - 20,000 Hz; rated 100 watts per
channel mininmm RMS power, with no more
than 0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier
section
Power ()till)ill l )
Mininmm
RMS Output Power
(8 nhms, 20 Hz
20 kHz, THD 0.09%)
100 W + 100 w
Stere() Mode Output Power
(8 nhms, 1 kHz, THD 0.7%)
ll0W+
ll0W
Surround Mode Output Pnwer 2)
(8 nhms, I kHz, THD 10%)
150 W per channel
l)Measured under the lk_llnwing conditions:
120 V AC. 60 Hz
2)Reference power output for front, center, surround
and snrronnd back speakers. Depending on the
sound field settings and the source, there may be
no
sound
ontput.
Freqnency
response
Analog
Input
Analog
Digital (Cnaxial)
Digital (Optical)
l0 Hz-70
kHz,
+0.5/-2
dB (wid_ sound
field and equalizer
bypassed)
Sensitivity:
500 mV/
50 kohms
S/N3): 96 dB
(A, 500 mV 4))
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
Output (analog)
AUDIO OUT
SUBWOOFER
Equalizer
Gain levels
Vnltage: 500 mV/
10 kohms
Voltage: 2 V/I kohm
_+10dB, 1 dB step
3)INPUT SHORT (with sound field and equalizer
bypassed).
4)Weighted network, inpnt level.
FM tuner section
Tuning range
87.5 MHz
108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate fi'equency
10.7 MHz
AM tuner
section
Tuning range
With l()-kHz tuning scale:
530 kHz-
1,710 kHz 5)
With 9=kHz tuning scale:
531kHz
1,710kHz 5)
Antenna
(aerial)
Lnop antenna
Intermediate frequency
450 kHz
5)Ynu can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE. press POWER on the receiver. All preset
stations will be erased when you change the tuning
scale. Tn reset the scale to 10 kHz (or 9 kHzh
repeat the procedure.
Video
section
lnpnts/Ontputs
Vide():
1 Vp-p, 75 ohms
COMPONENT
VIDEO:
Y: 1 Vp-p, 75 ohms
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
104 Us

Advertisement

Table of Contents
loading

Table of Contents