Performing Several Commands In Sequence Automatically (Macro Play) - Sony STR-DA5600ES Operating Instructions Manual

Performing several
commands in sequence
automatically
(Macro Play)
The Macro Play function lets you link several
commands in a sequential order as a single
command.
The remote provides 2 macro lists (MACRO 1
and MACRO 2). You can specify up to 20
commands for each macro list.
Note
When setting up Macro Play, replace the batteries
with new ones.
RM SET
UP
Input
buttons
MACRO 1
MACRO 2
Program the sequence of the
operation
1
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing RM SET UP.
The RM SET UP button flashes and one
of the input buttons lights up (as the initial
setting, the BD button lights).
2
Press the input button for the
component for which you want
to program the sequence of
operation(s).
3
Press the buttons you want to
program in the same sequence
as you want the operation(s) to
be performed.
You can program particular operations
AMP
using the following buttons.
Press
The input
button for more
than 1 second
MACRO 1 or
MACRO 2
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3 when you
want to program operations for
other components.
5
Press RM SET UP to finish the
programming process.
Operations to be
programmed
Switches inputs.
Make a one second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.
continued
157 GB