Sony STR-DA5600ES Operating Instructions Manual page 11

ARC (page 106)
TV input is selected and the Audio Return
Channel (ARC) signals are detected.
D HDMI OUT A + B (page 105)
Lights up when the signals are output
from the HDMI OUT A or B jack. + also
lights up, along with A and B when the
signals are output from both jacks.
E SLEEP
Lights up when the sleep timer is
activated.
F MEMORY
A memory function, such as Name Input,
etc., is activated.
G ZONE 2/ZONE 3
Lights up while operation in zone 2/zone
3 is being enabled.
H SERVER (page 85)
Lights up when the server function is
activated.
I L.F.E.
Lights up when the disc being played
back contains an L.F.E. (Low Frequency
Effects) channel. The L.F.E. channel
signal is actually being reproduced, the
bars underneath the letters light up to
indicate the level.
J SP AB (page 46)
K BI-AMP
Lights up when surround back speakers
selection is set to "BI-AMP."
L D.C.A.C.
Lights up when auto calibration is
performed.
M D.L.L.
Lights up when the D.L.L. (Digital
Legato Linear) function is activated.
N H.A.T.S.
Lights up when the H.A.T.S. (High
quality digital Audio Transmission
System) function is activated.
O Tuning indicators
Lights up when the receiver tunes in radio
stations, or satellite radio stations.
SIRIUS (USA/Canadian model only)
The SiriusConnect Home tuner is
connected and "SIRIUS" is selected.
ST
Stereo broadcast
MONO
Monaural broadcast
RDS (European model only)
RDS information is received.
CAT (USA/Canadian model only)
The category mode is selected during the
satellite radio operation.
PRESET
The tuning mode is set to the preset mode.
P VOLUME
Displays the current volume.
Q D.RANGE
Lights up when dynamic range
compression is activated.
R Dolby Digital Surround indicators
Lights up one of the respective indicators
when the receiver is decoding the
corresponding Dolby Digital format
signals.
;D
Dolby Digital
;D+
Dolby Digital Plus
;D EX
Dolby Digital Surround EX
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections
and that INPUT MODE is not set to "Analog."
S DTS-HD indicators
Light up when the receiver is decoding
DTS-HD.
DTS-HD
Lights up constantly with the one of the
following indicators.
MSTR
DTS-HD Master Audio
HI RES
DTS-HD High Resolution Audio
continued
11 GB