Sony STR-DA5600ES Operating Instructions Manual page 103
Multi channel av receiver
Hide thumbs
Also See for STR-DA5600ES:
- Mode d'emploi (190 pages) ,
- Integration manual (9 pages) ,
- Features (2 pages)
Table of Contents
Advertisement
5
Select "Control for HDMI," then
press
or b.
6
Select "ON," then press
The Control for HDMI function of the
receiver is activated.
7
Press GUI MODE to exit the GUI
menu.
If the GUI menu is displayed, the Control
for HDMI function of the playback
components will not work properly.
8
Press one of the HDMI input
buttons to display the image of
the playback components for
which you want to set the
Control for HDMI function.
9
Turn the Control for HDMI
function of the connected
component on.
For details on setting the connected
component, refer to its operating
instructions.
10
Repeat steps 8 and 9 to set the
Control for HDMI function and
to display the image of all the
playback components you want
to use.
Notes
• When you pull out the HDMI cable or change the
connection, perform the steps above.
However, you do not need to perform these steps
when you use an HDMI IN 1, IN 2, or IN 6 jack.
• When you assign the component video input to the
HDMI input using the Input Assign function, you
cannot set "Control for HDMI" to "ON."
Playing back components with
one-touch operation (One-Touch
.
Play)
By a simple operation (one-touch),
components connected to the receiver with
HDMI connections start automatically.
You can enjoy the sound/image using
connected components.
When you set
and image can be output only from the TV
while the receiver remains in standby mode.
Play back a connected component.
The receiver and TV are turned on
simultaneously, and sound and image are
output from the receiver and TV.
To use the One-Touch Play of
the camcorder
1
Turn the Control for HDMI function on
for both the receiver and your
camcorder.
2
Connect your camcorder to the HDMI
IN 1, IN 2, or IN 6 jack (page 26).
The receiver and TV are turned on
simultaneously, and sound and image are
output from the receiver and TV.
Notes
• Connect your camcorder to the HDMI IN 1, IN 2,
or IN 6 jack. The camcorder may not work
correctly if you connect it to the HDMI IN 3, IN 4,
or IN 5 jack.
• Depending on the TV, the start of the content may
not be output.
Enjoying the TV sound from the
speakers connected to the
receiver (System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
Pass Through
to
ON,
"
"
"
continued
sound
"
103
GB
Advertisement
Table of Contents
