Manual Setup; Sur Back Assign - Sony STR-DA5600ES Operating Instructions Manual

Sur Back Assign

Lets you set the SURROUND BACK/ZONE 2
terminals for a bi-amplifier connection or a
zone 2 connection.
x OFF
x BI-AMP
x ZONE2
Note
Set "Sur Back Assign" to "OFF," then connect the
surround back speakers to this receiver when you
want to change the connection from a bi-amplifier
connection or a zone 2 connection to a surround
back speakers connection. Re-set up the speakers
after you connect the surround back speakers. See
"Auto Calibration" (page 47) or "Manual Setup"
(page 119).

Manual Setup

You can adjust each speaker manually on the
Manual Setup screen. You can also adjust the
speaker levels after auto calibration is
completed.
To adjust the speaker level
You can adjust each speaker's level (center,
surround left/right, surround back left/right,
front high left/right, subwoofer).
1
Select the speaker on the screen for
which you want to adjust the level, then
press .
2
Select "Level:," then press
3
Set the level of the selected speaker,
then press .
You can adjust the level from –20 dB to
+10 dB in 0.5 dB steps.
For the front left/right speakers, you can
adjust the balance on either side. You can
adjust the front left level from FL–10.0 dB
to FL+10.0 dB in 0.5 dB steps. You can
also adjust the front right level from
FR–10.0 dB to FR+10.0 dB in 0.5 dB
steps.
Note
When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to "LARGE." However, the sound
will be output from the subwoofer if the digital input
signal contains L.F.E. signals, or if the front or
surround speakers are set to "SMALL," the sound
field for movie is selected, or "Portable Audio" is
selected.
To adjust the distance from the
seating position to each
speaker
You can adjust the distance from the seating
position to each speaker (front left/right,
center, surround left/right, surround back left/
right, front high left/right, subwoofer.)
1
Select the speaker on the screen for
which you want to adjust the distance
from the seating position, then press
2
Select a "Distance:," then press
3
Set the distance of the selected
speaker, then press
You can adjust the distance from 1.0 meter
to 10.0 meters (3 feet 3 inches to 32 feet
9 inches) in 1 cm (1 inch) steps.
To adjust the size of each
speaker
You can adjust each speaker's (front left/right,
center, surround left/right, surround back left/
right, front high left/right) size.
.
1
Select the speaker on the screen for
which you want to adjust the size, then
press
2
Select a "Size:," then press
3
Set the size of the selected speaker,
then press
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
.
.
.
continued
.
.
.
119 GB