Operating Without Connecting To A Tv - Sony STR-DA5600ES Operating Instructions Manual

The current software version and latest
software version are displayed on the TV
screen.
3
Press to select "Update."
A confirmation screen appears on the TV
screen.
4
Select "Start," then press
Receiver updating starts.
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
updating.
When the updating complete, the receiver
will restart automatically.
Notes
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
performed.
– When all versions are the latest one.
– When the receiver cannot retrieve the data, such
as when the network has not been set up, or
when the server is down, etc.
• Do not turn the receiver off or disconnect the
network cable during software updating. It may
cause a malfunction.
• It may take 50 minutes for the software updating to
complete.
Operating without
connecting to a TV
You can operate the receiver using the display
window of the receiver even if the TV is not
connected to the receiver.
.
GUI
MODE
RETURN/
EXIT O
Using the menu in the display
window
If "GUI MODE" is displayed in the display
window of the receiver when you press
MENU, DISPLAY, or V/v, press GUI MODE
to switch the display mode of the menu to
"DISPLAY MODE." (After "GUI MODE
OFF" has appeared in the display window of
the receiver, the receiver is switched to
"DISPLAY MODE.")
1
Turn on the receiver.
2
Press MENU.
The menu is displayed in the display
window of the receiver.
Example: When you select "SPEAKER
SETTINGS"
3
Press V/v repeatedly to select
the menu, then press
V/v/b,
MENU
or b.
continued
135 GB