Connecting Speaker Systems S; Using Ac Outlets; Eeee En Aeae - Sony STR-GX49ES Operating Instructions Manual

© Connecting Speaker Systems
Speaker (L)
Set the SPEAKER IMPEDANCE SELECTOR according to the
impedance of the used speakers, using a screwdriver.
e(O Oe
to the second
speaker system
Receiver
CAUTION
When you operate two speaker systems simultaneously, be
sure to use the speakers with the impedance of more
than 8 ohms and set the SPEAKER IMPEDANCE SELECTOR to
4-62.
Note Speaker impedance and power capability
Once the speakers have been connected, move This receiver is designed to work best with speakers having
SPEAKERS selector (on the front panel) to A, BorA +8 nominal impedance from 4 to 16 ohms at rated 50 watts RMS per
setting. channel with an 8 ohms load from 20 — 20,000 Hz.
When using the headphones, set the SPEAKERS
selector to OFF.
© Using AC outlets
Connect the AC power cord of each piece of equipment to
Receiver the AC outlet on the receiver so that you can turn the
equipment on and off using the receiver's POWER switch.
Caution
Be careful that the total power consumption of each piece of
equipment connected to the outlets on the receiver does not
exceed 100 waits (for USA), 120 watts/1A max (for Canada).
Do not connect electrical home appliances such as an electric
iron, fan, TV, or other high-wattage equipment to these outlets.