List Of Error / Message Codes - Canon Powershot G1 User Manual

List of Error / Message Codes

The following error and message codes may appear on the display panel.
Error Codes
: The camera has experienced a problem. Turn the main dial to
(xx: number)
a second, and then try shooting or replaying. If the error code appears
repeatedly, there is a problem. Note the error code number and take
the camera in for servicing. If an error code appears immediately after
a shot, there is a chance that the image was not recorded. Check the
image in replay mode.
Message Codes
: Replaying image.
: Connected to computer in PC connection mode.
: Adequate battery charge.
: Low battery charge. Charge the battery as soon as possible to use for
any length of time.
: Battery charge low, camera will not operate. Immediately recharge or
replace the battery pack with a charged one.
Could also indicate that the battery cover is open. Close the cover
securely.
: No CF card in camera, CF card slot cover is open, or CF card error.
: Power turned on with lens cap on. Remove cap, then turn power off
and on again.
, wait
127
Appendices