Flir Pass Through - visual engineering MFR-DB User Manual

MFR-DB

Flir Pass Through

Through the camera's serial comms path the thermal camera module can be controlled using
standard FLIR protocol, which is wrapped using the following custom VISCA command/response�
The payload of the command/response is the standard FLIR command�
Send Command
8[x] 0x01
[x] = The Unit Address, which can be set in the
[a] = Payload Length
[b] = Standard Flir Command Payload, variable length
Response Acknowledge
[y]0
Response Complete
[y]0 0x51
[y] = The Unit Address+8�
[a] = Payload Length
[b] = Standard Flir Command Payload, variable length
visualengineering.co.uk
0x04 0x24
0x24 0x9F
0x9F 0x01
Comm Port Options
0x41
0x01
[a] [b]
in the boot menu�
0xFF
[a] [b]
December 2021
0xFF
0xFF
Page 12