Connecting ZONE B
Connecting a Pre-main Amplifier, etc. (ZONE B)
a
a Analog audio cable
Contents
Connections
≫
While performing playback through speakers (ZONE A) connected to the unit,
you can enjoy the audio of the same source at the same time with the pre-main
amplifier or the transmitter of the wireless headphones connected to the ZONE
B LINE OUT jack. Use an analog audio cable to connect the ZONE B LINE OUT
jack of this unit and the LINE IN jack of the pre-main amplifier or the transmitter of
the wireless headphones.
Press the Q button on the remote controller for playback, and select the audio
output destination on the Quick menu. (
Setup
• Settings are required to output audio to ZONE B. Press
controller, and set "2. Speaker" - "Configuration" - "Zone 2 Preout" (
to "Zone B".
LINE
IN
Premain Amp.
OR
Transmitter
80
Playback
≫
p119)
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫
≫
on the remote
p158)