Onkyo TX-RZ740 Instruction Manual page 50

„ 5.1 Channel System + ZONE SPEAKER (European, Australian and Asian models)
MAIN ROOM
3
2 1
6
5 4
ZONE 3
ZONE 2
bk 9
8 7
MAIN ROOM: This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation"
p19).
(
ZONE 2/ZONE 3: You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing 5.1-ch playback in
the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3
simultaneously. Also, different sources can be played back in both rooms.
To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note
that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable.
Contents Connections
≫
50
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p181)
Speaker Setup
Speaker Channels 5.1 ch < >
Subwoofer Yes
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker Zone 2
Zone 2 Preout Zone 2
Bi-Amp No
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: Zone 2 or
Zone 2/Zone 3
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p46)
Setup
When video and audio via HDMI
input are output to ZONE 2, set
"1. Input/ Output Assign" - "TV Out /
OSD" - "Zone 2 HDMI" ( p153)
to "Use" on the Setup menu.
≫
Next