Onkyo TX-RZ740 Instruction Manual page 168

Setting Item Default Value Setting Details
HDMI Standby Off When this is set to anything other than "Off",
Through you can play the video and audio of an HDMI-
connected player on the TV even if the unit is in
standby mode. Also, only "Auto" and "Auto(Eco)"
can be selected if "HDMI CEC" is set to "On". If you
select anything else, set "HDMI CEC" to "Off".
• When this function is set to a value other than
"BD/DVD", "GAME", "CBL/SAT", "STRM BOX",
"PC", "AUX", "CD", "TV", "PHONO": For example,
if you select "BD/DVD", you can play the device
connected to the "BD/DVD" jack on the TV even
if the unit is in standby mode. Select this setting
if you have decided which player to use with this
function.
"Last": You can play on the TV the video and audio
of the input selected immediately before the unit is
switched to standby. When "Last" is selected, you
can switch the input of the unit using the remote
controller or the Onkyo Controller even in the
standby mode.
"Auto", "Auto (Eco)": Select either of the settings
if the connected player conforms to the CEC
standard. You can play the video and audio of
the player on the TV using the CEC link function,
irrespective of what input is selected immediately
before the unit is switched to standby.
• To play a non-CEC compliant player on the TV,
• When using a CEC-compliant TV, you can
Contents
"Off", the power consumption in standby state
increases, however, the increase in power
consumption is minimized by automatically
entering the HYBRID STANDBY mode where
only the essential circuits operate.
turn the unit on and switch the input.
reduce the power consumption in standby mode
by selecting "Auto (Eco)".
Connections
≫
Setting Item Default Value
Audio TV Out Off
Audio Return Off
Channel
Auto Lip Sync On
168
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
You can enjoy audio through the speakers of the
TV while this unit is on.
"On": When this function is used
"Off": When this function is not used
• This setting is fixed to "Auto" if you set "1. Input/
Output Assign" - "TV Out/OSD" - "HDMI Out"
or "HDMI" - "HDMI Out" in the "Quick Menu" to
"MAIN" or "MAIN+SUB" and set "HDMI CEC" to
"On". If you change this setting, set "HDMI CEC"
to "Off".
• Listening mode cannot be changed while "Audio
TV Out" is set to "On" and audio is being output
from the TV.
• Depending on your TV or input signal of the
connected device, audio may not be output from
the TV even if this is set to "On". In such a case,
audio is output from the speakers of the unit.
• Audio is output from this unit if you operate the
MASTER VOLUME dial on this unit when audio
that is input to this unit is output from your TV
speakers. If you do not want to output audio,
change the setting of this unit or TV, or reduce
the volume of this unit.
You can enjoy the sound of the HDMI-connected
ARC-compatible TV through the speakers
connected to the unit.
"On": When enjoying the TV sound through the
speakers of this unit
"Off": When not using the ARC function
Automatically corrects desynchronization between
the video and audio signals based on the
information from the HDMI Lip-Sync-compatible TV.
"On": When enabling the automatic correction
function
"Off": When not using the automatic correction
function
≫