Onkyo TX-RZ740 Instruction Manual page 63

„ 5.1.4 Channel System + ZONE SPEAKER (For North American models only)
MAIN ROOM
bk 9
8 7
2 1
3
6
5 4
ZONE 2
bm bl
MAIN ROOM: This is an example of combining the top middle speakers at the front and the rear high speakers at the rear
to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that
can be combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front (
❏ Combination example when Top Middle Speakers are used at the front (
❏ Combination example when Front High Speakers are used at the front (
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front (
ZONE 2:
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio.
Contents Connections
≫
p30)
p32)
p33)
p35)
63
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p181)
Speaker Setup
Speaker Channels 5.1.4 ch < >
Subwoofer Yes
Height 1 Speaker Top Middle
Height 2 Speaker Rear High
Zone Speaker Zone 2
Zone 2 Preout Zone 2
Bi-Amp No
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 5.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the
type of height speaker actually
installed.
• Height 2 Speaker: Select the
type of height speaker actually
installed.
• Zone Speaker: Zone 2
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p46)
Setup
When video and audio via HDMI
input are output to ZONE 2, set
"1. Input/ Output Assign" - "TV Out /
OSD" - "Zone 2 HDMI" ( p153)
to "Use" on the Setup menu.
≫
Next