Onkyo TX-RZ740 Instruction Manual page 58

„ 5.1.2 Channel System + ZONE SPEAKER (European, Australian and Asian models)
MAIN ROOM
8 7
3
2 1
6
5 4
ZONE 2
bk 9
MAIN ROOM: This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example (
❏ Ceiling Speakers Installation Example (
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example (
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
Contents
p22)
p23)
p24)
Connections
≫
58
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p181)
Speaker Setup
Speaker Channels 5.1.2 ch < >
Subwoofer Yes
Height 1 Speaker ---
Height 2 Speaker Front High
Zone Speaker Zone 2
Zone 2 Preout Zone 2
Bi-Amp No
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: Select the
type of height speaker actually
installed.
• Zone Speaker: Zone 2
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p46)
Setup
When video and audio via HDMI
input are output to ZONE 2, set
"1. Input/ Output Assign" - "TV Out /
OSD" - "Zone 2 HDMI" ( p153)
to "Use" on the Setup menu.
≫
Next