Connecting An Av Component In A Separate Room (Multi-Zone Connection); Connecting A Pre-Main Amplifier (Zone 2) - Onkyo TX-NR585 Instruction Manual

Connecting an AV Component in a Separate Room (Multi-zone Connection)

Connecting a Pre-main Amplifier (ZONE 2)

a
BD/DVD
a Analog audio cable
Contents Connections
≫
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 7.1-
ch playback in the main room (where this unit is located). Use an analog cable
to connect the ZONE 2 LINE OUT jack of this unit and the LINE IN jack of the
pre-main amplifier in the separate room. The same source can be played back in
the main room and ZONE 2 simultaneously. Also, different sources can be played
back in both rooms.
• To output audio from an externally connected AV component to ZONE 2,
use an analog audio cable for connection. Also, the audio from externally
connected AV components can be output to ZONE 2 only when the audio is
analog signal.
a
LINE
IN
Premain Amp.
36
Playback
≫
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫