Onkyo TX-RZ740 Instruction Manual page 55

„ 7.1 Channel System (Bi-Amping the Speakers)
3
2 1
6
5
8 7
You can configure a 7.1 Channel System (
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
4
For high-
frequency
For low-
frequency
p20) by connecting front speakers that support Bi-Amping connection.
Contents Connections
≫
55
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p181)
Speaker Setup
Speaker Channels 7.1 ch < >
Subwoofer Yes
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker No
Zone 2 Preout Zone 2
Bi-Amp Yes
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: No
• Zone 2 Preout: Set any value
( p158)
• Bi-Amp: Yes
• Speaker Impedance: Set any
value ( p46)
≫
Next