Onkyo TX-RZ740 Instruction Manual page 150

Setup Menu
Menu list
You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" (
1. Input/Output 1. TV Out / OSD
Assign
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
2. Speaker 1. Configuration
2. Crossover
3. Distance
4. Level Calibration
5. Dolby Enabled
Speaker
6. Equalizer Settings
7. THX Audio
8. Speaker Virtualizer
3. Audio Adjust 1. Multiplex/Mono
2. Dolby
3. DTS
4. LFE Level
5. Volume
Contents
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
Change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the
VIDEO IN jacks.
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
Change input assignment between the input selectors and AUDIO IN jacks.
Change the settings of connection environment of the speakers.
Change the settings of crossover frequencies.
Set the distance from each speaker to the listening position.
Adjust the volume level of each speaker.
Change the settings of Dolby Enabled Speakers.
You can adjust the output volume of the range for each connected speaker.
Change the THX Audio settings.
The Speaker Virtualizer function can be switched between On and Off.
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
Change the Volume settings.
150
Connections
≫ ≫
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫
p152).
p153
p154
p155
p156
p156
p157
p159
p160
p161
p162
p162
p163
p163
p164
p164
p165
p165
p165
≫