Onkyo TX-RZ740 Instruction Manual page 62

„ 5.1.4 Channel System
bk 9
8 7
2 1
3
6
5 4
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1
Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be
combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front (
❏ Combination example when Top Middle Speakers are used at the front (
❏ Combination example when Front High Speakers are used at the front (
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front (
Contents Connections
≫
p30)
p32)
p33)
p35)
62
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p181)
Speaker Setup
Speaker Channels 5.1.4 ch < >
Subwoofer Yes
Height 1 Speaker Top Middle
Height 2 Speaker Rear High
Zone Speaker No
Zone 2 Preout Zone 2
Bi-Amp No
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 5.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the
type of height speaker actually
installed.
• Height 2 Speaker: Select the
type of height speaker actually
installed.
• Zone Speaker: No
• Zone 2 Preout: Set any value
( p158)
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p46)
≫
Next