Displaying Internal Test Pattern; Using The Status Function - Panasonic PT-RZ21К Operating Instructions Manual

Chapter 3 Basic Operations — Operating with the remote control

Displaying internal test pattern

The projector has nine types of internal test patterns to check the condition of the projector. To display test
patterns, perform the following steps.
button
1) Press the <TEST PATTERN> button.
2) Press qw to select the test pattern.
Note
f Test patterns can also be displayed using the menu operation. Refer to "[TEST PATTERN] menu" (x page 180) for details.
f Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing
various adjustments.

Using the status function

Display the status of the projector.
button
1) Press the <STATUS> button.
f The [STATUS] screen is displayed.
Note
f The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu → [STATUS]
(x page 173) for details.
82 - ENGLISH
STATUS
PROJECTOR TYPE
PT-RZ21K
SERIAL NUMBER
123456789012
PROJECTOR RUNTIME
100000h
LIGHT RUNTIME 100000h / 100000h
CONTINUOUS LIGHTING TIME
1h 23m
MAIN/SUB VERSION
1.00 / 1.00
INTAKE AIR TEMP. 27°C/80°F
OPTICS MODULE TEMP.
31°C/87°F
31°C/87°F
EXHAUST AIR TEMP.
LIGHT1 TEMP. 31°C/87°F
LIGHT2 TEMP. 31°C/87°F
SELF TEST
NO ERRORS
SEND E-MAIL
ENTER
CHANGE EXIT
MENU
1/6