Panasonic PT-RZ21К Operating Instructions Manual page 66

Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can
change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].
1) Press qw to switch the setting.
f The setting will change each time you press the button.
2) Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the following
item.
PT-RZ21K: [16:10]
PT-RS20K: [4:3]
3) Press qw to adjust.
4) Press the <ENTER> button to proceed to the initial setting.
66 - ENGLISH
INITIAL SETTING
SCREEN FORMAT 16:10
SCREEN POSITION
Set as necessary for the screen in use.
MENU SELECT CHANGE
SET
ENTER
INITIAL SETTING
SCREEN FORMAT 16:9
0
SCREEN POSITION
Set as necessary for the screen in use.
CHANGE
MENU SELECT
SET
ENTER
5/7
5/7