Panasonic PT-RZ21К Operating Instructions Manual page 210

Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
----- ERROR INFORMATION -----
U21 Intake air temp. error
Error code
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
Intake air temperature
Optics module temperature
Exhaust air temperature
Light1 temperature
Light2 temperature
PROJECTOR RUNTIME
POWER ON
LIGHT1 RUNTIME
LIGHT1 ON
LIGHT2 RUNTIME
LIGHT2 ON
-------- Current status ---------
MAIN VERSION
SUB VERSION
LIGHT STATUS
INPUT
SIGNAL NAME
SIGNAL FREQUENCY
REMOTE2 STATUS
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
Mon Jan 01 12:34:56 20XX
----- Memo -----
[Crestron tools] page
Set the information required for connecting the Crestron control system to the projector.
The [Crestron Connected(TM)] page is not displayed if Adobe
the browser you use does not support Flash. In such a case, set [Control System] in this page.
Click [Detailed set up] → [Crestron tools].
1 [IP Address]
Sets the IP address of the control system.
2 [IPID]
Sets the IPID of the control system.
210 - ENGLISH
Chapter 5 Operations — Web control function
: PT-RZ21K
: 123456789012
: 25 degC / 77 degF
: 28 degC / 82 degF
: 28 degC / 82 degF
: 28 degC / 82 degF
: 29 degC / 84 degF
7 H
132 times
7 H
174 times
7 H
177 times
1.00
1.00
LIGHT1=ON LIGHT2=ON
SDI1
---
---kHz / ---Hz
DISABLE
OFF
192.168.0.8
12:34:56:78:90:12
Flash Player is not installed on your computer, or
® ®
1
2
3
4
3 [Port]
Sets the port number of the control system.
4 [Submit]
Updates the setting.