Table of Contents
Advertisement
Overview of the remote control buttons
Mute button
Press to mute the sound. Press again to
restore.
DIGITAL/
button
Press to switch between digital or analogue
mode.
Screen format button
Press repeatedly to change the screen
format.
Buttons 0-9
Press to input the required channel number.
For numbers 10 and above, enter the next
digit within 2 seconds.
GUIDE button
Occasionally
the
broadcaster
information such as a TV Guide which can be
displayed on screen. You will be asked to press
the GUIDE button when this happens.
MODE button
This remote operates not only Sony DVDs and
VCRs,
but
also
those
manufacturers. Press this button to select the
type of equipment you want to control. A green
light appears momentarily to indicate the mode
selected.
Note: Before operating your VCR or DVD, you must
enter the correct configuration code. Please refer to
the section 'Remote Control Configuration for VCR/
DVD'.
Text button
Press to enter text mode.
EPG button
Press to display the Electronic Programme
Guide when in Digital mode.
Control pad
Use these buttons to navigate through the
menu system of the TV.
Note: When the MODE button has been set to
VCR or DVD, the control pad operates the main
functions of your VCR or DVD.
Coloured buttons
These buttons are used for text and Digital
menus. Refer to the relevant sections in this
instruction manual.
transmits
made
by
other
/
VIDEO
button
Press to switch off your VCR or DVD
temporarily. Press again to return to normal
operation.
/
TV
button
Press to switch off your TV temporarily. The
Red indicator on the front of the TV will
illuminate. Press again to return to normal
operation.
Input button
/Hold button
Press
to
select
signals
connected
to
the
TV
'Connecting optional equipment to the TV').
In Text mode press to keep a page on display.
Press again to cancel.
Previous channel button
Press to return to the previous channel you were
watching (providing you watched it for at least 5
seconds).
Note: If the MODE button is set to VCR, use this
button to select double digit numbers on your
VCR, e.g. press this button, then press 2 and 3
for 23.
REC button
When the MODE button is set to VCR, press this
button to place your VCR in record mode.
Info button
Press to display the INFO menu in Digital mode.
When watching analogue programmes press to
reveal information such as programme number.
When in text mode, press to reveal hidden
information such as answers on quiz pages.
Press once more to clear hidden information.
INDEX button
Occasionally
the
broadcaster
information which can be displayed on screen.
You will be asked to press the INDEX button
when this happens.
PROG +/- button
Press to select the next or previous programme.
In Text mode, press to select the next page or the
previous page.
Volume + and - button
Press to adjust the volume to the desired level.
MENU button
Press to enter the menu system of this TV.
Getting started
from
equipment
sockets
(refer
to
transmits
9
Advertisement
Table of Contents
