Overview Of The Remote Control Buttons - Sony KD-32NX100U Operating Instructions Manual

Getting started

Overview of the remote control buttons

Mute button
Press to mute the sound. Press again to
restore.
DIGITAL/ button
Press to switch between digital or analogue
mode.
Screen format button
Press repeatedly to change the screen
format.
Buttons 0 - 9
Press to input the required channel number.
For numbers 10 and above, enter the second
digit within 2 seconds.
GUIDE button
Has no function on this model.
MODE button
This remote can operate not only Sony DVDs
and VCRs, but also those made by other
manufacturers . Press this button to select the
type of equipment you want to control. A green
light appears momentarily to indicate the mode
selected. Note: before operating your VCR or
DVD, you must enter the correct configuration
code. Please refer to the section 'Remote
Control Configuration for VCR/DVD'.
Text button
Press to enter the text mode.
EPG button
Press to display the Electronic Programme
Guide when in Digital mode.
Control pad
Use these buttons to navigate through the
menu system of the TV.
Note: When MODE button has been set to
VCR or DVD, the control pad operates the
main functions of your VCR or DVD.
Coloured buttons
These buttons are used for the text and Digital
menus. Refer to the relevant sections in this
instruction manual.
8
/
VIDEO button
Press to switch off your VCR or DVD
temporarily. Press again to resume normal
operation.
/
TV button
Press to switch off your TV temporarily. The
Red indicator on the front of the TV will
illuminate. Press again to resume normal
operation
Input button /Hold button
Press to select signals from equipment
connected to the TV sockets (refer to
'Connecting optional equipment to the TV').
In text mode press to keep a page on display.
Press again to cancel.
Previous channel button
Press to return to the previous channel you
were watching (providing you watched it for at
least 5 seconds)
In digital text mode, press to remove the digital
text display from the TV screen.
Note: If the MODE button is set to VCR, use this
button to select double digit numbers on your VCR,
e.g. press this button, then press 2 and 3 for 23.
REC button
When the MODE button is set to VCR, press
this button to place your VCR into record mode.
Info button
Press to display the INFO menu in Digital
mode. When watching analogue programmes
press to reveal information such as programme
number etc.
INDEX button
When in digital mode, press to display the
Channel Index menu.
PROG +/- button
Press to select the
programme.
In text mode, press to select the next page or
the previous page.
Volume + and - button
Press to adjust the volume to the desired level.
MENU button
Press to enter the menu system of this TV.
next or previous