Table of Contents
Advertisement
The Main Menu
CA Set-up
This feature allows you to access a pay per view service once you have obtained a Conditional Access
Module (CAM) and a viewing card. Please contact your nearest pay-per-view supplier for details.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM into the
OK
3. Insert your viewing card into the CAM.
4. Connect the TV to the mains and switch on.
5. Press the
6. Press the V or v button to highlight 'Detailed Set-up', then press the OK button to display the Detailed
7. Press the V or v button to highlight 'CA Set-up' in the Main Menu, then press the OK button to display
For further information regarding the available services, please contact your pay per view supplier.
Personal Information
Use this option to enter personal information such as your e-mail name and address.
1. Press the
2. Press the V or v button to highlight 'Personal Information', then press OK to display the Personal
3. If you wish to change your user name, address or e-mail, press the V or v button to highlight your
4. If you wish to change the MHP Applications Font Size, press the V or v button to highlight 'MHP
when inserting.
Note: If you have already attached the door that covers the rear sockets, you will have to unscrew and remove this
to gain access to the CAM socket.
button, then the BLUE button on the remote control to display the Main Menu.
Set-up menu.
the supplier's set up menu.
button, then the BLUE button on the remote control to display the Main Menu.
Information menu.
chosen option then press the OK button to display a keyboard. Press the RED button to clear the
existing name or address. Press the V, v, B and b buttons to select the letter or number your require
then press the OK button to display the letter/number in the name box. Repeat this procedure until the
new name is complete then, after using the V, v, B and b buttons to highlight DONE, press the OK
button to return to the 'Personal Information' menu.
Applications Font Size' then press the OK button to confirm. Press the V or v button to change the
existing font size, then press the OK button to confirm.
socket on the rear of the TV as shown. Take care not to damage the CAM
Digital features
viewing card and
CAM
19
Advertisement
Table of Contents
