Overview; Overview Of Remote Control Buttons - Sony KV-32FX68K Instruction Manual

Overview of Remote Control Buttons

ql 1
2
3
4
qk
5
qj
6
qh
7
qg
8
9
qf
q;
qd
qa
qs
1 To Temporarily Switch Off TV: Press this button to temporarily switch off TV (the
standby indicator on the TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use. After 15
minutes without a signal and without any button being pressed, the TV switches
automatically into standby mode.
2 Selecting input source: Press this button repeatedly until the desired input symbol of
the source appears on the TV screen.
3 Selecting channels: If Media Selector is switched to TV or VCR, press this button to
select channels. For double-digit programme numbers, enter the second digit within 2.5
seconds.
4 a) If Media Selector is switched to TV:
Press this button to watch the last channel selected (the last channel watched for at least
5 seconds).
b) If Media Selector is switched to VCR:
For Sony's VCR double-digit programme numbers, e.g. 23, press -/- - first and then the
buttons 2 and 3.
5 This button only works in Teletext mode.
6 Selecting screen format: Press this button repeatedly to change the format of the
screen. For more details refer to chapter "Auto Format" on page 14.
7 Selecting Teletext: Press this button to switch on teletext.
8 a) If Media Selector is switched to TV:
• When MENU is switched on, use these buttons to operate the menu system. For
details refer to "Introducing and Using the Menu System" on page 9.
•When MENU is switched off, press OK to show a channel overview. Then
press or to select the channel and then press again the OK button to watch the
selected channel.
b) If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
9 Recording button: If Media Selector is switched to VCR, press this button to record
programmes.
q; Media Selector: With this remote control you can operate not only this TV but also the
main functions of your VCR or DVD. For more details, refer to chapter "Remote Control
Configuration for VCR or DVD" on page 20.
qa Selecting channels: Press this button to select the next or previous broadcast channel.
qs Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.
qd Adjusting TV volume: Press this button to adjust the volume of the TV.
qf Displaying the menu system: Press this button to display the menu on the TV screen.
Press again to remove the menu display from the TV screen.
qg Selecting TV mode: Press this button to switch off teletext or video input.
qh Selecting Sound effect: Press this button repeatedly to change the sound effect.
qj Selecting Picture mode: Press this button repeatedly to change the picture mode.
qk Displaying on Screen information: Press this button to display all on-screen
indications. Press again to cancel.
ql VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.
Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext
operation. For more details, please refer to "Teletext" section of this instruction manual.
5

Overview