Switching Between Digital And Analogue Programmes; Finding Your Video Channel - Sony KD-32NS100B Instruction & Operation Manual

Trinitron digital tv
Hide thumbs Also See for KD-32NS100B:
Table of Contents

Advertisement

OK
OK

6. Finding your video channel

6. Press the BLUE button repeatedly to remove all digital menus from
the TV screen.
The analogue tuning display appears automatically and the TV
begins to search for analogue signals.
Once all signals have been captured and stored, the TV returns to
normal operation and displays the digital programme captured on
programme number 1.
7. If no signals are captured, a menu appears asking you to confirm
your aerial is connected. Check your aerials are connected, then
press OK to start the search procedure again.
Note: If no digital signals were captured, then the analogue programme
stored on programme number 1 is displayed.
8. To view programmes, press the PROG+/- buttons or the numbered
buttons on the remote control.
Switching
between
programmes
To check if you are watching a digital or an analogue programme press
the
button on the remote control. If you are watching a digital
programme an Info display appears on screen providing brief details for
both the current and next programme. To change to analogue
programmes press the DIGITAL/
When you wish to return to digital programmes press the DIGITAL/
button once more.
If you connected a VCR to your TV when following the 'Connecting your
aerial and satellite instructions', you now need to find your video channel.
1. First ensure the TV is in analogue mode. If not press the DIGITAL/
button on the remote control.
2. Press the PROG+/- button until the picture from your pre-recorded
tape appears on screen.
Note: If you wish to move your video channel to a different programme number,
refer to the 'Re-arranging your channels' section of this manual.
If you have connected your VCR using a scart lead, press the
button repeatedly on the remote control until the picture from the tape
appears on the TV screen.
digital
and
analogue
button.
Getting started
/
7

Advertisement

Table of Contents
loading

Table of Contents