Overview; Overview Of Remote Control Buttons - Sony KV-28EW20U Instruction Manual

Overview of Remote Control Buttons

Muting the Sound
Press to mute TV sound. Press again to
restore the sound.
Displaying on Screen information
Press to display all on-screen indications.
Press again to cancel.
Selecting channels
Press numbered buttons to select channels.
For double-digit programme numbers, e.g.23,
press -/-- first then the buttons 2 and 3.
Selecting TV mode
Press to switch off teletext or video input.
Menu selection
• When MENU is switched on, use these
buttons to operate the menu system. For
details refer to "Introducing and Using the
Menu System" on page 9.
• When MENU is switched off, press OK to
show a channel overview. Then
press or to select the channel and
then press again the OK button to watch the
selected channel.
Selecting sound mode
Press repeatedly to change the
sound mode.
Selecting Picture mode
Press repeatedly to change the
picture mode.
This button only works in Teletext mode.
Adjusting TV volume
Press to adjust the volume of the TV.
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to "Teletext" section of this instruction manual.
To Temporarily Switch Off TV
Press to temporarily switch off TV (the standby
indicator on TV lights up). Press again to switch on
TV from standby mode.
To save energy we recommend
switching off completely when TV is not
in use.
After 15 minutes without a signal
!
and without any button being
pressed, the TV switches
automatically into standby mode.
Selecting input source
Press repeatedly until the desired
input symbol of the source appears on the
TV screen.
Previous channel
Press to watch the last channel selected
MENU
(watched for at least 5 seconds).
Displaying the menu system
Press to display the menu on the TV
screen. Press again to remove the menu
display from the TV screen.
Selecting Teletext
PROGR
Press to switch on teletext.
Selecting Screen format
Press repeatedly to change the format of
the screen. For more details, refer to
chapter "Auto Format" on page 15.
RM-887
Selecting channels
Press to select the next or previous
channel.
5

Overview