Table of Contents
Advertisement
Digital features
The Info display
This display gives you information both on the current programme being shown and on future programmes when available from the
broadcaster (up to 24 hours ahead) . The Info display provides a brief description of the current programme, its channel number and
the start and end time. The title of the next programme and its start and end time is displayed in a smaller box to the right of the
current programme's information.
OK
14
1. Press the
button on the remote control to view the Info display. If the display does not appear,
press the DIGITAL/
display.
2. Use the B and b buttons to move around the display.
The coloured buttons give you access to further options:-
RED button-
When pressed a pop-up menu allows you to change the language for the subtitles
(when available). Press the V or v button to select the language required, then press
the OK button to confirm.
GREEN button- When pressed a pop-up menu allows you to select the language in which you wish to
hear the broadcast (when available). Press the V or v button to select the language
required, then press the OK button to confirm.
YELLOW button- Allows you to record a programme from the Info display, or to set a programme to
automatically appear on screen when it starts. Press the B or b buttons to select a
future programme from the Info display, then press the YELLOW button to display the
Timers pop-up menu.You can now choose from a) Record b) Wakeup or c) Manual.
a) Record
b) Wakeup Highlight Wakeup and press OK if you wish the future programme you
c) Manual
Notes on recording:
The 'Manual' feature only works if you have connected your VCR to the AV3 socket
After you have programmed a recording you can put the TV into its standby mode, but do not switch off completely or
the recording will be cancelled. If you put the TV into standby mode, the standby indicator on the front of the TV flashes
green periodically to remind you a recording has been programmed. Once a programme has started recording, do not
change channels or switch to analogue mode or the recording will be cancelled.
BLUE button- Press to display the Main Menu (see next page).
button to switch to digital mode then press the
Highlight Record and press OK to automatically set your VCR to record the
selected programme (this will only work if your VCR has SmartLink facility
and is connected to AV3 socket
selected to appear on-sceen when transmission begins.
Highlight Manual and press OK if you wish the TV to output a channel to
your VCR for recording. The following display appears.
Press the V or v button to set the day of recording, then press the b button
to move to the start time. Repeat this procedure to set the start and stop
times and the channel number, then press the OK button to store and
return to the Info menu. Press the
the screen. Unless you have a Smartlink VCR, you must now set the timer
recording function of your VCR to switch on and off to correspond with the
programme you have stored for recording.
button to view the Info
3
3
s
s
3
3
on the rear of this TV).
button to remove the Info menu from
3
3
s
s
3
3
on the rear of the TV.
Advertisement
Table of Contents
