Sony KD-32DX150U Quick Start Manual

KD-32DX150U
Thank you for choosing this Sony
Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
4-094-113-01(1)
Checking the supplied
1
accessories
/
VIDEO TV /
DIGITAL
1 2 3
4 5 6
7 8 9
0
RF Loopthrough cable
OK
REC
MENU
TV
VCR DVD
PROG
Remote control
Inserting batteries into
2

the remote control

1
Remove the battery cover by
pushing down on the cover and
sliding in the direction shown.
2
Insert the batteries as
indicated in the battery
compartment.
Always remember to dispose of batteries in an environmentally friendly way.
3
Connecting an aerial only
RF loopthrough
lead (supplied)
1.
Connect your existing aerial lead to the digital socket marked
the TV as shown.
2.
Connect the supplied RF loopthrough cable from the socket marked
Batteries
analogue socket marked
Connecting an aerial and VCR
Scart lead
(not supplied)
1. Connect your existing aerial lead to the digital socket marked
TV as shown.
2. Connect the supplied RF loopthrough cable from the lower socket marked
the TV to the RF IN socket on your VCR.
3. Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked
4. Connect a scart lead from the socket marked
3
the scart socket on your VCR (refer to your VCR instruction manual).
Replace the battery cover.
5. Connect the VCR to the mains socket and switch on.
6.
Insert a pre-recorded tape into the VCR and press the 'PLAY' button. This enables
the TV to locate and store the video channel during the 'Automatically tuning the
TV' procedure.

Connecting the TV

Existing
aerial lead
on the rear of
.
Existing aerial lead
RF Loopthrough
lead (supplied)
RF lead
(not supplied)
Rear of VCR
on the rear of the
on the TV.
3 s 3 on the rear of the TV to
to the
on