WilTec 62054 Operation Manual

Beading machine for sheet metal working

Beading Machine for Sheet Metal Working

62054

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Table of Contents

Need help?

Do you have a question about the 62054 and is the answer not in the manual?

Page 1 Operation Manual Beading Machine for Sheet Metal Working 62054 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Page 3 1.2 (0.05″) with soft steel Max. workpiece thickness (㎜) 1.8 (0.07″) with aluminium inside 22, outside 55 Roller diameter (㎜) 440 (17″) Insertion depth (㎜) Weight (㎏) © by WilTec Wildanger Technik GmbH Item 62054 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
Page 4 3. Oil the drive shaft monthly through the oil openings. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62054 Page 4 http://www.WilTec.de...