Download Print this page

WilTec 65440 Operation Manual

Compressed-air

Advertisement

Quick Links

Operation Manual
Compressed-air Hose Reel
65440
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 65440 and is the answer not in the manual?

Questions and answers

Summary of Contents for WilTec 65440

  • Page 1 Operation Manual Compressed-air Hose Reel 65440 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
  • Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
  • Page 3 • Avoid bending or kinking the hose excessively, as this can reduce its lifespan. • Ensure that the hose reel is securely mounted to prevent it from falling. © by WilTec Wildanger Technik GmbH Item 65440 Page 3 http://www.wiltec.de 07 2024-1...
  • Page 4 Plastic Anchor Air Hose ST6.3 × 45 mm Lag Bolt Lead Hose Bottom Base Plate Air Inlet Air Outlet Handle Handle assembly screw Quick-release pin Manual brake pin © by WilTec Wildanger Technik GmbH Item 65440 Page 4 http://www.wiltec.de 07 2024-1...
  • Page 5 7. Wrap 3–5 layers of sealant tape around both connect- ors of the lead hose (C). Attach one end to the air in- let (E) and use a ⁄ ″ wrench (14 mm) to tighten it. © by WilTec Wildanger Technik GmbH Item 65440 Page 5 http://www.wiltec.de 07 2024-1...
  • Page 6 Make sure the pin is aligned with one of the 3 slots on the drum. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 65440 Page 6 http://www.wiltec.de...